$195.00 / ea, PN# CC-03-002
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100. Similar to Cub Cadet #703-0808 UNPAINTED
$195.00 / ea, PN# CC-03-002M
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100 - but with multi lift configurations. Similar to Cub Cadet #703-0808 UNPAINTED
Rear plate only for the Quietline and similiar tractors. Plate only - non painted.
$115.00 / Set, PN# CC-03-006
Reproduction Category 0 - 3 point Lift Arms. Sold as a set. Similar to Cub Cadet #703-0815 UNPAINTED
$245.00 / Set, PN# CC-03-043K
Reproduction Drag Arms and Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a complete kit as shown. Unpainted
$170.00 / Set, PN# CC-03-043
Reproduction Drag Arms for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted
$138.00 / Set, PN# CC-03-047
Reproduction Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted
$68.00 / Set, PN# CC-03-047-T
These are the ball and threaded end of the above lift link. Ball end has a 1/2" hole, and the threaded end is 1/2" fine threads. Extra heavy duty vs. the original ones. Comes as a pair. Unpainted
$95.00 / Set, PN# CC-34-002
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. 5/8 Furrels. Exact Replicas. Sold as a set. UNPAINTED Similar to Cub Cadet #703-0814 & 711-3122
$56.00 / Set, PN# CC-34-013
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. Sold each. Similar to Cub Cadet #703-0814
$64.00 / Set, PN# CC-34-013L
Just like the original ones, (CC-34-013) but 1.5" longer. Allows you to run equipment that is lower to the ground.
$64.00 / Set, PN# CC-03-012
Replacement ferrule for Cub Cadet 3 point lifts. 5/8" Threaded hole, 5/8" Stud, 1/8" Pin Hole. Similar to Cub Cadet #711-3122
$64.00 / Set, PN# CC-33-002
Turnbuckle Chain set keeps your equipment from swinging side to side. Has a 250# load buckles. Stainless steel loops bolt to your arms, providing a nice clean attachment point. Comes with hardware. Will fit other brands.
$40.00 / ea, PN# CC-35-002
Connects the 3rd link to your implement. Completely adjustable from 10" to 15". 5/8" holes. Comes with hole in the middle and rod to make it a T-Handle. Similar to Cub Cadet # 749-0238
$82.00 / ea, PN# CC-35-002S
This is the upper 3rd link for the Super Garden Tractors that have the factory 3 point setup on them. The top link uses a 1/2" dia pin instead of the 5/8" like the regular garden tractors. Connects the 3rd link to your implement. Comes with hole in the middle and rod to make it a T-Handle.
$62.00 / ea, PN# CC-98-032
Fits category 0 three point hitches. The ends are 5/8" diameter with 1/4" holes for retainer pins. The (7) holes in the bar are 3/4" for ball hitches and other pins. Length of the drawbar usable area is 19". Most other ones on the market only offer the 5/8" doles on the drawbar body section.
$52.00 / SET, PN# CC-96-060
If you have a category 0 3 point drawbar (CC-98-002) then these drawbar locks are a must. Keeps the drawbar from rotating if using a ball hitch. Clips on with D-Clips (included) and sold in pairs. UNPAINTED
$40.00 / ea, PN# CC-03-050
Manufactured adjustable 3 point upper link bracket. If you have an original Cub Cadet 3 point lift, and are missing this bracket, now you can get a manufactured reproduction. UNPAINTED
$12.00 / ea, PN# CC-36-002
Used for Cat. 0 projects. 2" OD, 5/8" pin hole, 1" wide.
$7.00 / ea, PN# CC-36-003
Used for Cat. 0 projects. 5/8" shaft , 5/8" Threaded end. Includes nut and lock washer
$70.00 / ea, PN# CC-03-007A
$80.00 / ea, PN# CC-03-007B
Connects the 3 point to the hydraulic cylinder. 82 Series, Spread Frames - Unpainted. Similar to Cub Cadet #703-0811 CC-03-007B would fit the Super Garden Tractors: 982, 1912, 1914, 1872, 2072,1572,1772, 1782, 1882, 2082, 2182, 2084, 2184, 2284, 2086 with our Category 0 3 point kits.
$70.00 / ea, PN# CC-03-014
Connects the 3 point to the hydraulic cylinder. Quietline Tractors only - Unpainted. 1250, 1450, 1650
$48.00 / ea, PN# CC-03-020
If you have a 3 point and want to hold it in the up position while you use the mower deck, you can use this adjustable dog-bone link to hold the load in the up position. Comes with the (2) 1/4" plates and (1) 1/2" plate, bolts and weld on tab for your equipment. Additional weld on tabs available separately. UNPAINTED
$14.00 / ea, PN# CC-03-021
Weld this clevis onto your implement to attach the load lock to. 5/8" dia. holes. Can also be used for building cat 0 equipment connections. UNPAINTED
$125.00 / ea, PN# CC-19-200
A weight bracket for holding suitcase weights on your 3 point lift. Category 0 attachments. 1/2" x 2" bars allow hanging of most all garden tractor suitcase weights on the front side, back side or both. UNPAINTED.
Products shipped UPS
Technical advice and more
Wasnt what you wanted? Contact us for returns
Parts make a great gift
Connect and Share - lets get the word out
© 2020 Xtreme Motorworks, LLC. All rights reserved