If you need parts for completing a Category 0 - 3 point hitch, or you are building you own - we have lots of 3 point pats and accessories.
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100. Similar to Cub Cadet #703-0808 UNPAINTED
This is a replacement plate for your 3-point lift system. Similar to kit #190-389 and #190-389-100 - but with multi lift configurations. Similar to Cub Cadet #703-0808 UNPAINTED
Rear plate only for the Quietline and similiar tractors. Plate only - non painted.
Reproduction Category 0 - 3 point Lift Arms. Sold as a set. Similar to Cub Cadet #703-0815 UNPAINTED
Reproduction Drag Arms and Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a complete kit as shown. Unpainted
Reproduction Drag Arms for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted
Reproduction Lift Link Adjusters for the Cub Cadet Super Garden Tractors. Just like the originals. Comes as a pair as shown. Unpainted
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. 5/8 Furrels. Exact Replicas. Sold as a set. UNPAINTED Similar to Cub Cadet #703-0814 & 711-3122
Connects the 3 point rock shaft arms to the lift arms. 5/8" - Cat. 0 ball sockets, 5/8 threaded shaft. Sold each. Similar to Cub Cadet #703-0814
Just like the original ones, (CC-34-013) but 1.5" longer. Allows you to run equipment that is lower to the ground.
Replacement ferrule for Cub Cadet 3 point lifts. 5/8" Threaded hole, 5/8" Stud, 1/8" Pin Hole. Similar to Cub Cadet #711-3122
Turnbuckle Chain set keeps your equipment from swinging side to side. Has a 250# load buckles. Stainless steel loops bolt to your arms, providing a nice clean attachment point. Comes with hardware. Will fit other brands.
Connects the 3rd link to your implement. Completely adjustable from 10" to 15". 5/8" holes. Comes with hole in the middle and rod to make it a T-Handle. Similar to Cub Cadet # 749-0238
This is the upper 3rd link for the Super Garden Tractors that have the factory 3 point setup on them. The top link uses a 1/2" dia pin instead of the 5/8" like the regular garden tractors. Connects the 3rd link to your implement. Comes with hole in the middle and rod to make it a T-Handle.
Fits category 0 three point hitches. The ends are 5/8" diameter with 1/4" holes for retainer pins. The (7) holes in the bar are 3/4" for ball hitches and other pins. Length of the drawbar usable area is 19". Most other ones on the market only offer the 5/8" doles on the drawbar body section.
If you have a category 0 3 point drawbar (CC-98-002) then these drawbar locks are a must. Keeps the drawbar from rotating if using a ball hitch. Clips on with D-Clips (included) and sold in pairs. UNPAINTED
Manufactured adjustable 3 point upper link bracket. If you have an original Cub Cadet 3 point lift, and are missing this bracket, now you can get a manufactured reproduction. UNPAINTED
Used for Cat. 0 projects. 2" OD, 5/8" pin hole, 1" wide.
Used for Cat. 0 projects. 5/8" shaft , 5/8" Threaded end. Includes nut and lock washer
Connects the 3 point to the hydraulic cylinder. 82 Series, Spread Frames - Unpainted. Similar to Cub Cadet #703-0811 CC-03-007B would fit the Super Garden Tractors: 982, 1912, 1914, 1872, 2072,1572,1772, 1782, 1882, 2082, 2182, 2084, 2184, 2284, 2086 with our Category 0 3 point kits.
Connects the 3 point to the hydraulic cylinder. Quietline Tractors only - Unpainted. 1250, 1450, 1650
If you have a 3 point and want to hold it in the up position while you use the mower deck, you can use this adjustable dog-bone link to hold the load in the up position. Comes with the (2) 1/4" plates and (1) 1/2" plate, bolts and weld on tab for your equipment. Additional weld on tabs available separately. UNPAINTED
Weld this clevis onto your implement to attach the load lock to. 5/8" dia. holes. Can also be used for building cat 0 equipment connections. UNPAINTED
A weight bracket for holding suitcase weights on your 3 point lift. Category 0 attachments. 1/2" x 2" bars allow hanging of most all garden tractor suitcase weights on the front side, back side or both. UNPAINTED.
5/8" Pin for the top link.
1/4" Lynch Pins
5/8" x 1" Headed Pin
5/8" x 1 1/2" Headed Pin
1/8" Hair Pin
Category 0 - Top Link Pin - Bent