Xtreme Motorworks LLC

Rear End, Drive Line and Hydro Parts


We have the Axle reinforcement parts for your SGT - these you cant live without. We also have some reproduction parts for the rest of the drive line and transmission parts.

GT Rear Axle Reinforcement Brace

$130 / set

    Got a broken front transmission aluminum or cast pump pump bracket? Then you need the torque arm. It bolts to your rear end axle tubes and then bolts up to the frame. Adds stiffness, rigidity and strength to your tractors rear end and transmission assembly. Sold in pair, UNPAINTED

SGT Rear Axle Reinforcement Brace

$130 / set

    Got a broken front transmission aluminum or cast pump pump bracket? Then you need the torque arm. It bolts to your rear end axle tubes and then bolts up to the frame. Adds stiffness, rigidity and strength to your tractors rear end and transmission assembly. Sold in pair, UNPAINTED.

SGT and GT Race Brace

$105 / set

    Need a way to add some stability to the rear axle of your tractor? Introducing the race brace. It uses the 2 holes in the axle tube and nests up against the frame. Drill a couple of holes in the bottom frame lip and you've supported your axle way more that it was factory supported. Kt contains bolts and a brace for each side. UNPAINTED

.25" Thick Aluminum Rear End Cover

$36 / ea.

    These are the covers for the Aluminum rear ends. Made out of .25 thick steel. Thick enough to weld on or build off of. Sold each, Unpainted.

.25" Thick Cast Iron Rear End Cover

$36 / ea.

    These are the covers for the cast iron rear ends. Made out of .25 thick steel. Thick enough to weld on or build off of. Sold each, Unpainted.

Hydro Cam Pivot Bracket Newer Cubs

$36.50 / ea.

    Fits 1210, 1282, 680,1512, 882, 782-Diesel,1710, 682,1711, 1712, 782, 784, 1912, 1914, 982, 984, 986, 1210, 1211, 1340, 1541, 1572, 1772, 1782, 1810, 1811 & 1812, 1860, 1862, 1864, 1872 & 2072, 1882, 2082, 2084, 2086, 2182, 2284 UNPAINTED

Hydro Cam Pivot Bracket

$36.50 / ea.

    Hydro Cam Pivot Bracket. Fits older cub cadets not listed above. Prior to the 82 series. Fits Quietlines. UNPAINTED

Trunion Repair Kit

$11.50 / ea.

    A fix to repairing your worn out trunion bracket. Can be done in the tractor and minimal work. UNPAINTED

Charge Pump Outer Seal

$9.50 / ea.

    This is the seal that fits the charge pump where the drive shaft enters the front of the hydro pump. Approx. .50 ID and 1.00 OD

Differential Cover - Sight Plug Aluminum Rear Housing

$54 / ea.

    A new style differential cover that allows you to fill your rear end without having to use the fill tube. Bottom of the fill hole is matched to the fill line on the dip stick. Bottom plug acts as a drain, and has a magnet in it for catching fine filings. .179 Steel, Unpainted. Gasket not supplied. For Aluminum Rear Ends only. UNPAINTED

Differential Cover - Sight Plug Cast Iron Rear Housing

$54 / ea.

    A new style differential cover that allows you to fill your rear end without having to use the fill tube. Bottom of the fill hole is matched to the fill line on the dip stick. Bottom plug acts as a drain, and has a magnet in it for catching fine filings. .179 Steel, Unpainted. Gasket not supplied. For Cast IRon Rear Ends only. UNPAINTED

Power Steering Control Valve Mount

$43.50 / ea.

    For mounting the power steering sector into 82 series tractors. Very hard to find. Unpainted.

82 Series High Strength Tie Rod Kit

 

$64.50 / ea.

    This is a tie rod upgrade to the 82 series and quite a few tractors following it. It is not for the SGT's. Will work with power steering. Rod is .375" ID x .25" wall, measuring a whopping .875 OD Diameter. Rod ends are heavy duty to take the abuse. UNPAINTED

Manual Transmission Drive Shaft Coupler

$38 / ea.

    For manual transmission cub cadets. May also work on others. 5/8" ID with 1/4 holes for shear pins (not included) Replaces Cub Cadet PN# IH-394036-R1 USE IH-394036-R2

Cub Cadet WF / NF Drive Hub

$60 / ea.

    Reproduction drive hubs for the narrow and wide frame cub cadets. Made from 1045 CR steel. Cub Cadet PN# IH-394034-R21 USE IH-394034-R32

Solid Driveshaft Donut

$12 / ea.

    This is the same shape as the rubber one used in the Fits 800, 1000, 1100, 1200, 1250, 1450, 1650, 482, 580, 582, 682, 782, 782D, 882, 1872, 2072, 982, 984, 1050, 1210, 1202, 1211, 1512, 1541, 1710, 1711, 1806, 1810, 1811, 1912, 1914, 1860, 1812, 1572, 1772, and more. Unpainted.

SGT 3 Point with PTO Rear End Cover

$95 / ea.

    Reproduction of the original unit. Unpainted.