Xtreme Motorworks LLC

Snowblower Parts


We have parts to fix that worn out snow thrower or the 450 / 451 two stage snow blowers. We also carry the largest selection of snowblower cutting edges.

45" 450 451 551 Snowblower Hydraulic Lift Bracket

$90 / ea.

    Lift bracket for the newer cyclops tractors and up. Dimensionally same shape as the original, but made out of grade 50 steel and machined instead of the cast iron original ones. Grade 8 Stainless Steel hardware. Used for the lifting of front attachments, snowblowers 450, 451, 551 etc. Fits the following Models: 1440 1641 1861 1862 1863 1864 1782 2082 2084 2086 2182 2284 Similar to Cub Cadet # 719-3097

Cyclops Push Pull Bracket

$115 / ea.

    This is a combination lift and push bracket for the Cyclops snow blowers and push blades. Dimensionally same shape as the originals, but made out of grade 50 steel and machined and welded instead of the cast iron original ones. Stainless Steel hardware. Used for the lifting of front attachments, snowblowers 450, 451, 551 etc and push blades. Fits the following Models: 1440 1641 1861 1862 1863 1864 1782 2082 2084 2086 2182 2284 and others that use the 719-3097 bracket.

Snow Blower Lift Bracket 450/451 on Regular Cub Cadet

$45 / ea.

    Lift bracket for adding a 450 / 451 / 551 to a 82 series or even older cub cadet. Makes your tractor from a pull to lift to a push to lift like the Super Garden Tractors. UNPAINTED Similar to Cub Cadet # 784-5415 USE 784-5415-0499

Implement Lift Rod

$24 / ea.

    Implement lift rod. For lifting push blades, snowblowers, etc. 1/2" dia with 1/8" holes on each end for clip. UNPAINTED.

Adjustable Lift Rod

$32 / ea.

    Adjustable lift rod provides 2.5" of travel on the adjuster nut end. The rod can be adjusted from 25.5" to 30.5" for the 28" and 29.5" to 34.5" for the 34", covering the factory lift rods of 28". Adjustable end with locking nut. Threaded shaft end is stainless steel so you do not have to paint the threads or worry about corrosion. Sold UNPAINTED.

Snow Thrower Auger Rotor Repair Kit

$85 / ea.

    Repair your worn out shaft and sprocket with this repair kit. Similar to IH-397031-R1. Shaft is welded to sprocket. Fits QA-36 and QA-42. UNPAINTED

Snow Thrower Auger Rotor 24 Tooth #40 Sprocket

$45 / ea.

    Snow Thrower auger rotor 24 tooth #40 sprocket. This is laser cut from 1/4" stainless steel. Heated to 500 degrees and quenched. 1" diameter hole. Fits QA-36 and QA-42. UNPAINTED

Snow Thrower Auger Rotor 24 Tooth #40 Sprocket with Holes

$45 / ea.

    Snow Thrower auger rotor 24 tooth #40 sprocket. This is laser cut from 1/4" stainless steel. Heated to 500 degrees and quenched. 1" diameter hole. Has 3 - 3/8" holes for plug welds or for bolting applications. Fits QA-36 and QA-42. UNPAINTED

Snow Thrower Auger Rotor 24 Tooth #40 Sprocket With Slots

$45 / ea.

    Snow Thrower auger rotor 24 tooth #40 sprocket. This is laser cut from 1/4" stainless steel. Heated to 500 degrees and quenched. 1" diameter hole. Has 3 - 3/8" slots for plug welds or for bolting applications. Fits QA-36 and QA-42. UNPAINTED

Snow Thrower Auger Rotor Repair Shaft

$22 / ea.

    1" snow thrower stub shaft for repairing your auger tube. Fits QA-36 and QA-42. UNPAINTED

Snow Thrower Auger Rotor Centering Washer

$11 / ea.

    This is the centering washer that fits inside the auger rotor tube. Typically need 2. Sold as each. Fits QA-36 and QA-42. UNPAINTED

Snow Thrower Auger Rotor Spacer Washer

$11 / ea.

    This is the spacer that goes between the outer centering washer and the sprocket. Fits 1" shaft. Fits QA-36 and QA-42. UNPAINTED

NF and WF Lift Bracket Extender

$26 / ea.

    Lift bracket extender bolts to your lift ear on your NF and WF cub cadets. Multi holes allow you to position your lift rod to obtain higher lift amounts. Knee action of the extender allows the blower or blade to float if needed, allowing you to leave your float lock in if needed. Works great in combination with CC-96-016 Below. UNPAINTED

450/451 Snow Blower Spring Assist

$135 / kit

    Spring assist for the 450 / 451 snowblowers. Bolts tot he bottom of the frame. On spread frames and newer, attaches using existing bolts and holes. Adjustable eye bolt for adjusting tension. Just like the kit originally sold by Cub Cadet for this setup. UNPAINTED

450 / 451 Two Stage Snow Blower Skids

$54.50 / pair

    Snow thrower skids for models shown below. Made from 1/4" material and also feature slots for adjustment up and down that the factory ones didn't have. UNPAINTED. Fits 350, 450, 451 Two Stage as well as, Models 420, 524, 826, 1028 Similar to Cub Cadet #784-5038A USE 784-5038B-0637

Snow Thrower Skids with Feet

$44.50 / pair

    Snow thrower skids for models BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B. UNPAINTED. Similar to Cub Cadet # IH-475565-R1 USE IH-475565-R2

Snow Thrower Wings

$55 / kit

    Adds 8" total to the width of your cut. Bolts on with no drilling. Fits QA-36 and QA42 Snowthrowers. Parts are painted in picture for example. Parts ship UNPAINTED

Drift Cutters

$28 / pair

    Attaches to the sides of your snow thrower. Aids in slicing thru deep drifts and help with guidance. Bolts on with no drilling. Fits QA-36 and QA42 Snowthrowers. Parts are painted in picture for example. Parts ship UNPAINTED

Snow Thrower Drift Hood 36"

$36 / ea.

    Attaches to the top of your snow thrower. Adds 4" of height to your blower and keeps the snow from coming over the top. Requires drilling. Fits QA-36 Snowthrowers. UNPAINTED

Snow Thrower Drift Hood 42"

$40 / ea.

    Attaches to the top of your snow thrower. Adds 4" of height to your blower and keeps the snow from coming over the top. Requires drilling. Fits QA-42 Snowthrowers. UNPAINTED

450 / 451 Super Extensions

$24 / pair

    For use with a 450 / 451 snowblower on a Super Garden Tractor. Sold in pairs. UNPAINTED

Snowblower Curved Top Lift Arms

Cub Cadet Snow Thrower Blower Top Lift Arms Curved

$32 / pair

    Used when adding a QA snowblower to late model tractors so the chute doesn't hit the hood and also for 82 series tractors for more clearance on installation. UNPAINTED Replaces PN/ IH-548192 R1 and IH-79011 C1

Snowblower Wear Edge - 36"

$53.00 / ea.

    Wear edge for BB36 and CW36 Snow Throwers. UNPAINTED. Similar to Cub Cadet # IH-475566-R1

Snowblower Wear Edge - 42"

$51.50 / ea.

    Wear edge for QA42 QA42A Snow Throwers. Includes (7) 5/16 x 1/2" carriage bolts and flange nuts. UNPAINTED. Similar to Cub Cadet # IH-397024-R1 USE IH-397024-R2

Snowblower Wear Edge - 36"

$48.50 / ea.

    Wear edge for QA36, QA36A,QA36B snow throwers. Includes (7) 5/16 x 1/2" carriage bolts and flange nuts. UNPAINTED. Similar to Cub Cadet # 397-023-R1 USE IH-397023-R2

Snowblower Wear Edge 45" for 450C

$37.50 / ea.

    Wear edge for 450C snow Blowers. UNPAINTED. Similar to Cub Cadet # IH-90430-C1 USE 05598-0637

Cub Cadet 450 451 Lift Straps

$24 / pair

    These are the lift straps for putting a 450 451 snowblower onto a SGT. UNPAINTED.

TITLE HERE

$0 / pair

    DESCRIPTION