Replacement Brinly Style Sleeve Hitch Bracket - Stock Length
$102.00 / ea, PN# CC-29-112
This is the reproduction of the sleeve hitch used on the Cub Cadets. It is stock length and width. Made from 3/8" Gr. 50 steel. Features rounded ends for more clearance in the up and down position. UNPAINTED
Sleeve Hitch Main Bracket Extended 3"
$123.00 / ea, PN# CC-29-112E
Just like the replacement Brinly Style Sleeve Hitch Bracket, but 3" longer to clear your tiller gear box. Made from 3/8" grade 50 steel like the CC-29-112. UNPAINTED.
Brinly Sleeve Hitch Extenders
$78.00 / kit, PN# CC-29-120
Add 3 to 4" onto your Brinly sleeve hitch bracket with this extension kit so that you can leave your sleeve hitch on with your tiller gear box. All hardware included. Does not include the the sleeve hit bracket shown in the top picture. Use with extended pin CC-29-115E. UNPAINTED
4 Hole Dual Tab - with ears
$87.00 / ea, PN# CC-29-010C - Cast Iron Rear End
$87.00 / ea, PN# CC-29-010A - Aluminum Rear End
End the fear of ever pulling the bolts out of your rear end! This has to be the toughest sleeve hitch bracket on the market. The extra side tabs help eliminate the bracket bending in on the sides plus the dual pin plates keep everything pulling straight. Made from 1/4" Grade 50 steel. Made to fit the either the cast iron rear ends or the aluminum rear ends. Must either buy the aluminum or the cast option when ordering.
4 Hole Dual Tab - Without Ears
$67.00 / ea, PN# CC-29-020C - Cast Iron Rear End
$67.00 / ea, PN# CC-29-020A - Aluminum Rear End
This is similiar to its big brother but without the ears that go to the axle tube bolts. Made from 1/4" Grade 50 steel. Made to fit the either the cast iron rear ends or the aluminum rear ends. Must either buy the aluminum or the cast option when ordering.
4 Hole Single Tab - With Ears
$67.00 / ea, PN# CC-29-030C - Cast iron Rear End
$67.00 / ea, PN# CC-29-030C - Aluminum Rear End
This is similiar to its big brother but without the dual tabs. Made from 1/4" Grade 50 steel. Made to fit the either the cast iron rear ends or the aluminum rear ends. The main sleeve hitch fits on the outside of this bracket. Must either buy the aluminum or the cast option when ordering.
4 Hole Sleeve Hitch Bracket
$34.00 / ea, PN# CC-29-103
4 hole sleeve hitch bracket. Fits cast iron and aluminum rear ends on all cub cadets. Great for tractors running 26x12-12 tires. Gives you another hole 1" lower to bring your plow angle back to level. The main sleeve hitch bracket fits on the outside of this bracket. Great for Super Garden Tractors. UNPAINTED.
3 Hole Dual Tab - With Ears
$79.00 / ea, PN# CC-29-050C - Cast iron Rear End
$79.00 / ea, PN# CC-29-050C - Aluminum Rear End
End the fear of ever pulling the bolts out of your rear end! This has to be the toughest sleeve hitch bracket on the market. The extra side tabs help eliminate the bracket bending in on the sides plus the dual pin plates keep everything pulling straight. Made from 1/4" Grade 50 steel. Made to fit the either the cast iron rear ends or the aluminum rear ends. Must either buy the aluminum or the cast option when ordering.
3 Hole Dual Tab - Without Ears
$53.00 / ea, PN# CC-29-060C - Cast iron Rear End
$53.00 / ea, PN# CC-29-060C - Aluminum Rear End
This is similiar to its big brother but without the ears that go to the axle tube bolts. Made from 1/4" Grade 50 steel. Made to fit the either the cast iron rear ends or the aluminum rear ends. Must either buy the aluminum or the cast option when ordering.
3 Hole Single Tab - With Ears
$53.00 / ea, PN# CC-29-070C - Cast iron Rear End
$53.00 / ea, PN# CC-29-070C - Aluminum Rear End
This is similiar to its big brother but without the dual tabs. Made from 1/4" Grade 50 steel. Made to fit the either the cast iron rear ends or the aluminum rear ends. The main sleeve hitch fits on the outside of this bracket. Must either buy the aluminum or the cast option when ordering.
3 Hole Sleeve Hitch Bracket
$27.00 / ea, PN# CC-29-101
3 hole sleeve hitch bracket. Fits cast iron and aluminum rear ends on all cub cadets. Great for tractors running 23x10.50-12 tires. The main sleeve hitch bracket fits on the outside of this bracket. Great for Regular Garden Tractors. UNPAINTED.
Sleeve Hitch Lift Straps - Static
$27.00 / pair, PN# CC-29-113
Replacement Lift Straps - Locking. Now out of .179" Thick Material! Heaviest on the market! UNPAINTED.
Sleeve Hitch Lift Straps - Floating
$27.00 / pair, PN# CC-29-114
Replacement Lift Straps - Floating. Now out of .179" Thick Material! Heaviest on the market! UNPAINTED.
Multi Config Lift Straps
$35.00 / pair, PN# CC-68-016
Quit carring 2 sets of lift straps with you when you go out to do your business.... Get our multi config lift straps. We combined the static and floating lift straps and came up with these. Sold per pair. Unpainted.
Stainless Steel Sleeve Hitch Lift Straps - Floating
$47.00 / pair, PN# CC-29-114-SS
Made from .188 Stainless Steel. Can be polished to a high luster to look chromed. Comes unpolished. UNPAINTED
Sleeve Hitch Lift Pin - Extended
$45.00 / ea, PN# CC-29-115E
Extended 1" Sleeve Hitch Lift Pin for use with CC-29-120. 3" Longer with extra hole for extended length sleeve hitch. UNPAINTED.
Double Drilled Extended Lift Pin
$48.00 / ea, PN# CC-29-115DDE
Double drilled lift bar. Has dual 1/2" holes that are at the stock length and at +3" for extended lift. Small holes are drilled 90 degrees apart for use with sleeve hitch and tiller lift assemblies. UNPAINTED
Lift Spring Inserts
$44.00 / ea, PN# CC-12-010
These are the inserts that thread into your lift assist spring. We have them with 3/8-16 or 1/2-13 threads. Limited supply so get your replacement now.
NF Lift Bar Attachment Block
$48.00 / ea, PN# CC-29-130
Narrow Frame lift bracket blocks. Comes with hardware.
WF Lift Bar Attachment Block
$48.00 / ea, PN# CC-29-131
Wide Frame lift bracket blocks. Comes with hardware.
82 Series Lift Bar Attachment Block
$51.00 / ea, PN# CC-29-132
Lift Block. Comes with hardware. IH part number 703-0813 750-0336 Used on Manual Lift Series Tractors for the CAT 0 three point and spring assist.
Sleeve Hitch Weight Bracket
$69.00 / ea, PN# CC-72-001
If you have a Brinly style sleeve hitch with the single or dual tab bracket, then you can use the Sleeve Hitch Weight Bracket. Attaches quickly and allows you to hang suitcase style weights on the rear. Works great with XMW Suitcase weights. UNPAINTED
Sleeve Hitch lift Bar - "Originals"
$51.00 / ea, PN# CC-68-020
For use with the factory cast iron 3rd point lifting system. UNPAINTED
Sleeve Hitch lift Bar - "Narrow Frames"
$51.00 / ea, PN# CC-68-021
For use with the factory cast iron 3rd point lifting system. UNPAINTED
Sleeve Hitch lift Bar - "Wide Frames"
$51.00 / ea, PN# CC-68-022
For use with the factory cast iron 3rd point lifting system. UNPAINTED
Sleeve Hitch lift Bar - "82 Series Hyd. Lift"
$51.00 / ea, PN# CC-68-023
For use with the factory cast iron 3rd point lifting system. Fits 782, 784, 1711, and 1712 below S/N 719999. UNPAINTED
Sleeve Hitch lift Bar - "582 Series Manual Lift"
$61.00 / ea, PN# CC-68-024
For use with the factory cast iron 3rd point lifting system. Fits 582. UNPAINTED
Brinly Cultivator Clamp
$7.00 / ea, PN# CC-20-008
Used on Brinly cultivators. Reproduction. Clamp only - sold individually. Picture shown with Wedge to show group. Wedge not included. UNPAINTED
Brinly Cultivator Wedge
$7.00 / ea, PN# CC-20-009
Used on Brinly cultivators. Reproduction. Wedge only - sold individually. Picture shown with Clamp to show group. Clamp not included. UNPAINTED
Brinly A-Frame Sleeve Hitch Adaptor
$65.00 / ea, PN# CC-19-120
This will fit the original Brinly A-Frames and will also fit others. Slotted mounting holes allow you more configuration. Comes with hardware and accessories shown. Unpainted
Brinly Lift Bar Bolt / Bushing Kit
$18.00 / ea, PN# CC-12-007
This is the bolt, bushing, and washers for the 3rd link lift arm to connect to the Lift Bar.
Low Cost Shipping
Products shipped UPS
Customer Support
Technical advice and more
Customer Satisfaction
Wasnt what you wanted? Contact us for returns
Gift for Someone
Parts make a great gift